Your basket is empty.

Added to Basket

Fuel-it N54 THROTTLE BODY INJECTION

$599.00 $595.00

Specification
Product Code FUEJM2UH3
Manufacturer Fuel-it
Condition New
Weight 4Lb

Earn Reward Points: 595

Dollar Value of Points: $5.95

PRODUCT DESCRIPTION
Are you running more E85 or making more power on pump gas than your HPFP (High Pressure Fuel Pump) can support?  If so this kit was developed to provide you with the additional fueling capacity that you need to be able to run 100% E85 on stock turbos or increase your fueling potential on upgraded turbos.  Our throttlebody injection kits are installed between your throttlebody and your intake manifold to provide you with more fueling capability while under boost.  It's a relatively easy system to install that supplements up to a 1 liter of fuel per minute at 20psi of boost and will support an additional 70-100whp on ethanol mixes.

For more information and installation guides, visit us on N54tech.com...http://www.n54tech.com/forums/showthread.php?t=30559

We offer these kits in 4 different packages to meet your needs:

*Please read the full description before making your purchase and contact us with any questions you may have.

Bronze kit inludes:

Throttlebody spacer
Fuel solenoid
Adapter and fuel line to connect to the factory fuel line
Hobb's switch to activate system under boost
Wiring harness
New bolts for the throttle body to install the spacer
Plug and play integration

 

Silver kit inludes:

Throttlebody spacer
Fuel solenoid
New upgraded fuel line to replace the factory fuel lines to the tank
Hobb's switch to activate system under boost
Wiring harness
New bolts for the throttle body to install the spacer
Plug and play integration

 

Gold kit inludes:

Throttlebody spacer
Fuel solenoid
New upgraded fuel lines to replace the factory fuel lines and add the ethanol sensor
New Continental ethanol sensor (requires analyzer to read ethanol content)
Hobb's switch to activate system under boost
Wiring harness
New bolts for the throttle body to install the spacer
Plug and play integration

 

Platinum kit inludes:

Throttlebody spacer
Fuel solenoid
New upgraded fuel lines to replace the factory fuel lines and add the ethanol sensor
New Continental ethanol sensor (requires analyzer to read ethanol content)
Hobb's switch to activate system under boost
Wiring harness
New bolts for the throttle body to install the spacer
Plug and play integration
Bluetooth and JB4 compatible ethanol analyzer
JB4 integrated (0-5 Volt) 
Bluetooth (Iphone or Android app must be purchased to use this feature)
If you are using an Apple product the app can be found by clicking here
If you are using an Andriod product the app can be found by clicking here

 

Please Read!

These kits are for track use only!
Be sure to purchase the kit for your engine type, N54 or N55 as the throttlebody bolts are different!
An upgraded low pressure fuel pump is required.  We recommend running our Stage 2 upgrade when running ethanol. 
We recommend running an aftermarket intake from Burger Motorsports. To run the stock airbox, it will need to be modified.
Hobb's switch...if your boost will taper to less than 15 PSI at redline, choose the 4 PSI Hobb's switch.
Please contact us at info@Fuel-It.com with any additional questions.
 *Ethanol sensor readings are based on the gasoline content of your fuel.  Fuel that has been contaminated can generate a false ethanol reading.

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

1 2 3 4 5
 

Verify you are a human

 
Please enter a valid email address.
This field is required.

© 2017 n54tuning.com